How to Make a Beautiful Wreath With Things Laying Around House
by mariottinibarbara4 in Craft > Reuse
197 Views, 0 Favorites, 0 Comments
How to Make a Beautiful Wreath With Things Laying Around House
The reason why I chose this project
The reason why I chose this project is that I like to make things by hand that are beautiful and bring joy to people this project makes me happy because I am on a tight budget and doing this would enable me to save money because laying around the house instead of going the store and spending money, I also feel that this helps the environment because it keeps stuff out of garbage dump.
Supplies
1. Glue
2. Templates for poppy flowers I used my own
3. Paint red green black yellow
4 used computer paper 12 sheets
4. Floral wire
5. tape
6. scissors
7. paintbrushes
8. old newspaper
9. pretty cloth 29 by 36 inches
10. 2 Cpap hoses
11. Sponge paintbrush
12. Floral Wire
13. Wire cutters
15 ruler
16 electrical tape
17 pen
18 1 safety pin
Gather All Supplies
so you can do the project
Lay Down Old News on the Surface You Are Going to Use to Paint
Paint 4-piece Paper Green, Yellow, Red, and Black
. Paint Papers on One Side and Let It Dry Overnight
. Trace Flower Parts Onto Paper Red Paper for Petals Green for the and One Long Skinny Piece for the Stem and Leaves Yellow for the Inner Circle Black for Stamen
Cup Pieces of Flowers
Chose 3 Circles 2 Black and 1 Yellow for Each Flower and Cut a Fringe on the Edge
Take Red Petals Cut Slits in the Bottom of Them
Also Cut 4 or 5 Slits on Top of the Red Petals
. Apply Glue on Any Red Petal by the Bottom Slit and Glue Them So They Overlap Do the Same for All Petals
. Take the Red Circle and Place It on a Flat Surface
. Glue the Three Bigger Petals on the Outside
. Glue the 3 Smaller Ones on the Inside in the Center of the Big Red Petals
. Glue the Black Circle in the Center of the Flower
Then Glue a Yellow Circle in the Middle of the Black Circle
The Take the Small Black Circle Crumple It Glues It to the Center of the Yellow Circle
Glue Leaves to the Bottom of the Flower .
Make Enough Poppies for the Size of Your Wreath
Cut Ends of CPAP Hose Off
With Electrical Tape CPAP Together So They Are Next to Each Other
With a Ruler Measure Cloth to Desired Length and Width Mine Was 2 Strips of Pretty Cloth 10 Inches by 30 Inches
With a Ruler Measure Cloth to Desired Length and Width Mine Was 2 Strips of Pretty Cloth 10 Inches by 30 Inches
.sew the 2 Ten Inch Sides Together
Sew the Two the 30-inch Sides Together to Make a Tube
Take a Safety Pin to the Inner Side of the Beginning of the Tube
Then Push Through the Inner Tube Until It Comes Out of the Other Side
Thread the CPAP Hoses Through the Tube
And Tape the Wreath Together. .
Adjust the Cloth to Close the Wreath
Take Floral Wire Cut It to Desired Shape and Length and Wrap It Around the Wreath
Take a Piece of Electrical Tape 1-inch Long and Roll It Over So It Is Sticky on Both Sides
Put Tape on Bottom of Poppy Flower
Attach Poppies to Wreath
