How to Make a Ballet Barre
Make your own ballet barre out of pvc! You can take it apart, so you can easily transport it from place to place.
Supplies
1.6in diameter pvc
A 68.625in
metal bar
Paint(optional)
2 corner pvc pieces
2 T pvc pieces
Prepping the Metal Bar
Take off any bolts on the metal bar, if you cannot unscrew them, then cut off that part of the bar.
Cut the Pieces
Cut the lengths of pvc to:
Two 41in pieces
four 9in pieces
One 67.375in piece
Assemble
Put one of the 41 in pieces into the middle part of one of the Ts. Repeat.
Put one 9 in piece into each side of the T, repeat, you should now have 2 pvc Ts
Put a corner piece on each one of the Ts, on one of the 9 in pieces secure the 67.375 in piece between the corner pieces, it should look like the image
Add the Bar
Then add the pipe, so both ends go into the pvc, it should look like the image
Paint(optional)
Spray paint it and the wait for it to dry.
Congratulations!, you now have a ballet barre!