How to Make (Yet Another) Lego Fighter Droid

In this Instructable, I will show you how to make... Yep, another Lego Droid. It isn't super different from the other ones, but I am posting it anyway. Hope you enjoy!

For this Instructable, you will need:

3 robo-arms

3 small spikes

An octo-plate

A peg with stud

A binoculars piece

A droid body

2 1x1 plates w/ clips

At least one round 1x1 stud

A Ninjago skeleton leg

A phone piece

At least 2 droid arms

2 arm-thingies with holes on the end (optional)

2 T-bars (optional)

Either just copy them from my first Instructable (make sure to leave out the dome part), or copy the pics.

For the lasers, attach the binoculars to the peg w/ studs, and then stick the peg end into the hole at the bottom of the octo-plate. (Yes, there is a hole.) (Sorry about the hand, it's my baby brother...)

First, attach a round 1x1 stud to the bottom of a clip plate. Then, clip it onto the bottom of the droid body. Next, put together a translucent 1x1 stud and the Ninjago skeleton leg. Attach it to where the droid's normal "head" would go on the body-this will serve as the "eye". Now, put 2 droid arms on the droid body. After that, put the body on the legs by squeezing the 1x1 on the clip between all 4 studs on the octo-plate, but make sure you push hard! It should then look like the final pic.

For the jetpack, you can either follow the pictures, or follow the instructions from here. Make sure you leave out the first 2 steps of that, though!

If you want to, you can add more arms. You can do this by attaching the T-bars and arms with hole-thingies as shown, and then attach the droid arms. Then, connect them to the octo-plate as shown(sorry for the bad pics).

You have officially finished this Instructable! Yay! If you liked this, then please follow and comment! Cya!