How to Make WINDMILL Generator From Cardboard for Science Project at Home
by diy_ocean in Workshop > Science
9153 Views, 23 Favorites, 0 Comments
How to Make WINDMILL Generator From Cardboard for Science Project at Home

Watch the video for a complete tutorial!
Materials you will need-
-Cardboard
-Green velvet paper
-Black coloured pencil
-Cutter
-Glue gun
-Wooden sticks
-Tissue papers
-3 watt yellow LED
-200 RPM, 12 V Motor
-Foldable cardboard
-Scissors
-Super glue
Take a Circular Cardboard Piece of Diameter 35 Cm and Cover the Top With the Green Velvet Paper.


Using the Cutter, Cut the Black Coloured Pencil As Shown.


Glue the Cut Pencils to the Velvet Paper As Shown. Also, Apply Glue to the Tip of These Pencils.

Stick a Cardboard Piece on the Top of These Pencils, With Measurements As Shown in the Image.


Follow the Images Shown to Make Cardboard Cutouts of the Measurements Given in Them, and Place Them As Shown.





Use the Cardboard and Wooden Sticks to Form the Window, Door and Staircase As Shown. Stick Tissue Paper Behind the Window.



Take Cardboard Pieces of the Given Measurements to Form a Box, and Make Holes As Shown.


Insert the LED’s As Shown. Insert the Motor in the Hole Made for It in the Cardboard.





Make the Wire Connections As Shown.

Take 4 Pieces of Foldable Cardboard, 6.5cm * 2.5 Cm, and Cut From the Bottom As Shown. Bend Them to Form a Curve.



Stack 3-4 Cardboard Pieces of 2.5cm on Top of Each Other and Cover the Sides With Foldable Cardboard.


Apply Super Glue All Over It and Stick the 4 Foldable Cardboard Pieces As Shown.



Attach This to the Motor. You Can Use Air Blower/ Table Fan/ Hair Dryer to Act As Wind. If the LED Lights Don't Turn On, Then Switch the Wires Attached to the Motor.




Complete the Structure of the Windmill Using Cardboard Pieces As Shown. Use Desired Colour to Paint the Roof and Blades. Your Windmill Generator Is Complete!


Your Windmill Is Ready! Watch the Video !
