How to Make Vacuum Cleaner With Motor - Easy Tutorials

Hi guys, welcome to my new project : Vacuum Cleaner. In this article, I will show you How to Make Vacuum Cleaner With Motor.

If you want a more visual instruction please click to this below instructional video.

If you like, SUBSCRIBE my Youtube channel ☞☞☞ HERE ☜☜☜. I always update my new projects everyday.

1. DC Motor

2. Two Plastic Bottle

3. Glue Gun

4. Fan

5. Battery

6. Switch

7. Soldering iron

First of all Cut one plastic Bottle in middle part as like picture using knife.

Now Make some hole in bottle part of the plastic bottle with soldering iron. see the picture.

Then cut bottle caps one side and add with dc motor including fan. See the picture.

Then Attached DC Motor Inside the bottle bottle part using glue gun, see the picture.

Then Join all the cable ( Dc motor , switch and battery ). See the picture

Then Cut another plastic bottle and attached with two bottle as like picture .

Then attached a card board into plastic bottle with glue gun . See the picture .

Then attached a piece of net with a card board . See the picture .

Then attached switch and battery with plastic bottle using glue gun . See the picture .

Then attached handle with plastic bottle . Here I am using pop stick for the handle , you can use any foam . See the picture .

Then attached top part plastic bottle , battery and switch . See the picture .

Now your vacuum cleaner is ready , you can use it and enjoy yourself .

I hope you like this article. If you confuse any of the steps you can watch full video into my video here:

Thank you for reading my instruction and watching my video.
See you in the next project. Click Here To Subscribe My YouTube Channel for more Video.