How to Make Tattoo Machine at Home - Homemade Tattoo Machine

Hi guys, welcome to my new project : Tattoo Machine. In this article, I will show you How to Make Tattoo Machine At Home

If you want a more visual instruction please click to this below instructional video.

If you like, SUBSCRIBE my Youtube channel ☞☞☞ HERE ☜☜☜. I always update my new projects everyday

Lastly.

Tools You Need

1. DC Motor

2. Battery

3. Glue Gun

4. Pen

5. Black Tape

6. Switch

7. Pinium

8. Single steel

9. Needle

Now insert needle into pen and in the back side of the needle inflect it as like picture.

Now attached a small steel with pen using glue gun, see the picture.

Now Add pinium with dc motor and make a small hole in the pinium to attached needle. See the picture

Now attached needle with pinium where u make a small hole as like picture.

Now attached dc motor with steel which is already attached with pen. See the picture.

Now add black tape with dc motor and steel also pen and steel.

Now Attached battery with pen using glue gun.

Now Attached Dc Motor, switch and battery cable.

Now Connect with battery and add switch into top of the battery using glue gun. see the picture.

Now Tattoo Machine is ready to Use And create tattoo. Like and Share this with your friends.

I hope you like this article. If you confuse any of the steps you can watch full video into my video here:

Thank you for reading my instruction and watching my video.