How to Make Star Wars Sith Holocron From Cardboard
by cowmanCRAFTS in Craft > Cardboard
535 Views, 2 Favorites, 0 Comments
How to Make Star Wars Sith Holocron From Cardboard
Sith holocrons were used by the sith to contain information. However, they could also be used as “keys that can open many doors.” Unlike the cube-shaped jedi holocrons, they were pyramid shaped.
This model is not as detailed as an actual sith holocron.
Supplies
Cardboard
Ruler
Knife
Hot glue
Paint (red and gold/yellow)
Creativity!
Shape and Measurements
Cut out this shape using your knife with these measurements (Go to 1st image). Then, flip the spare upside down and cut, but not fully, a square where the base of the holocron should be. (Go to 2nd image)
Glue!
Glue the sides of the triangles together with hot glue. You can also use super glue if you wanted. This will hold the pyramid together
Paint
Then wait for the paint to dry and coat the edges with yellow/gold paint (2nd image).