How to Make Shoes Stand With PVC Pipes

This is a shoes stand made with PVC pipes which is simple and easy to make this pvc pipes shoes stand is good for placing any kind of shoes and sandals , it is made of pvc pipes so it is lightweight and can be adjusted to the height from bottom sides.

If you like this video please vote for this instructables and if you don't understand something please watch the video.

15 inches pvc pipe x 4

12 inches pvc pipe x 4

U pvc joint x 4

T pvc joint x 4

pvc cap x 12

20 inches pvc pipe x 6

mdf board 20'' x 14'' = 3

Screws

Connect the 15 inches pipes to u joints on one side and other side with t joint sides and then connect it to 12 inches pipes forming a rectangle

Placing the pvc cap the inner side of u and t joints and also placing it on the 7.5 inches mark in the center of 15 inches pvc pipes, need to make a same pair making it two parts

Start placing the 20 inches pvc pipes to the pvc cap of both parts forming a container

Place the mdf board on all three levels and secure it with screws from all sides.The pvc shoes stand is ready and can place any type of shoes over it.