How to Make Paper Claws?

Today I will teach you how to make origami claws in 7 easy steps! CAUTION: Claws may be sharp.

Paper(ofc)

and time ;-;

Take a piece of normal printer paper. Notebook paper works just as well.

Take the top right corner of the sheet and fold it down so the top edge is lined up with the left edge.

Take the top left corner (this should be the only top corner) and fold it down to the other side.

Take the two bottom corners and fold them over so that the outside edges line up with the last fold.

Take the two bottom corners and fold them over so that the outside edges line up with the last fold.( Do it again)

Take the bottom portion of the paper and fold it back onto the top.

Take the right corner and fold it across so that the edge lines up with the center of the folded sheet.

Take the previous fold and fold again on it self almost as if you were rolling it across :)

This step is tricky. Take the bottom point and tuck it into the fold that was made by the previous creases.

Congrats. You did it! You now have a paper claw. Make five or even ten of them to cover both hands. CAUTION: Claws may be sharp. Take care not to scratch or poke yourself or others..