How to Make Imitation Fossils?

Let’s start laser etching Imitation Fossils with a cool mix of ancient charm and modern style! With a little laser magic, we can skip the tens of millions of years and craft stunning fossil-like textures in just a day.

Ready to bring a piece of “instant history” into your plant world? Follow the steps below and let laser magic bring your garden to life with fossil flair!

Machine Used

Aurora Lite 50W

Material Needed

Pebbles

Settings

1. Laser Etching
2. Speed: 4000mm/s
3. Marking Power: 90%
4. Frequency: 20kHz
5. Line interval: 0.02

Putting plywood on the laser bed as a pad to prevent the beam from damaging the laser bed, and then put down the Pebble on the pad. You can certainly reuse plywood that is dirty or has failed to engrave to avoid waste!

Load the imitation fossils design into LightBurn software, adjusting its size and position to fit you Pebble. Then make sure the laser etching parameters are set correctly.

Missing the focus is one of the biggest reasons for laser marking failure. So don’t forget to click the AF button for auto focus. Of course, manual focus is also effective.

When two red dots are displayed on the slate, it is out of focus. When the two light dots overlap each other, it means in focus.

Auto focus

Manual focus

Out of focus

In focus

Press the frame button and check if the visual red light indicate the right area to be etched. The frame should fit the Pebble. If not, move the pattern positions until they align.

After checking, close the laser door and begin Aurora Lite’s operation.

Stay near the machine throughout operation to monitor for any unusual sounds or alarms. This vigilance ensures safety during etching, as laser energy is potent. To avoid accidents as much as possible, don’t looking directly into the laser beam, even through the safety door.

Once laser etching is complete, carefully open the door and get your Imitation Fossils. Laser etching does not produce toxic substances, and you can use the slate coaster after a simple cleaning!

Come and Try!

Laser etching Pebble Imitation Fossils are fit for flower pots, planters, or landscape arrangements for the subtle, fossil-like patterns that spark curiosity and conversation. Whether you’re a home gardener looking to add unique flair, a landscape designer seeking distinctive accents, or a shop owner curating nature-inspired decor, these replicas deliver. They combine the timeless intrigue of ancient forms with precise laser craftsmanship, making them perfect for anyone who finds inspiration in both nature and design.