How to Make Flying Paper Rocket EASY ORIGAMI

Hello friends !!!
Today I am going to show you how you can make your own flying paper rocket with super easy origami techniques, and believe me guys it can reach up to 1000 ft in sky.
It's brilliant guys so let's get started !!!!

For the supplies we require -:
1) Origami paper or simple A4 size sheet
2) scissors
3) Rubber Bands

Once we have all the supplies we require we will start with making the main creases.
So in this step we will make a vertical crease in the centre line of sheet and fold as shown in the images above.

In this step, follow the folds as shown in the images and fold according to it.

Now we will fold the main center line vertical crease as shown in above images.
The shape will be triangular structure.

Now we have to fold the vertical crease again in the triangular part , we have to double the part as shown in the above images and fold the creases along it .

Once done, now we will make a small diagonal cut on the open side of the rocket as mentioned in the images.

Now we will open everything from the vertical creases. We should get 2 diagonal cut on both half sides of the rocket as shown in the images.
Fold the lower part of the rocket part below the cut on both sides.

Now we have to again close the rocket by Folding the vertical creases as shown in images.
We are ready for our launch now we will need just elastic bands or rubber bands ( long should be Good enough to give the Altitude the rocket wants) .

We are ready,
For the launch part take Rubber Band or elastic band and hook one end of the band in the cut of the rocket and hold the other in your hand now pull back the rocket as much as you can and launch high in the air .
Thank you
Happy making and Enjoy :) !!!