How to Make DIY MARBLE Run Machine From Cardboard Science Project at HOME

by diy_ocean in Craft > Art

6212 Views, 29 Favorites, 0 Comments

How to Make DIY MARBLE Run Machine From Cardboard Science Project at HOME

How to make DIY MARBLE Run Machine from cardboard Science Project at HOME

Materials you will need-

-Cardboard

-Cutter

-Glue

-100 RPM DC Motor

-B.O. Motor wheel

-DC motor speed controller

-Battery

-Coloured card paper

-Tape

-Foldable cardboard

-Long wooden sticks

Take a 50cm * 20cm Piece of Cardboard. Place a Cardboard Cutout of the Measurements As Shown, on It.

Picture2.png
Picture4.png
Picture3.png

Place the 100 RPM DC Motor As Shown. Cover Both Sides With Cardboard Pieces.

Picture5.png
Picture6.png

Take the Inside of the B.O. Motor Wheel, and Glue It to a Circular Cardboard Piece As Shown. Place This on the DC Motor. Now, Place a Cardboard Cutout As Shown.

Picture7.png
Picture8.png
Picture9.png
Picture10.png

Take a Circular Cardboard Piece With 30cm Diameter, and Make the Cuts of the Given Measurements. Take Another Circular Cardboard Piece of 20cm Diameter and Make Similar Cutouts.

Picture11.png
Picture12.png

Place the Circular Cardboard Piece Over the Wheel and Make Sure There Is a 5mm Gap As Shown.

Picture14.png

Place Cardboard Cutouts As Shown in the Following Images. Now, Place the Circular Cardboard As Shown. Cover the Front With a Circular Cardboard Piece of 10 Cm Diameter.

Picture13.png
Picture15.png
Picture16.png
Picture17.png
Picture18.png
Picture19.png
Picture1.png

Make the Connections As Shown Between the Motor, Battery and Speed Controller. Place the Battery and Controller on the Cardboard and Cover It Up As Shown.

Picture20.png
Picture21.png
Picture22.png

Take a Circular Coloured Card Paper of the Given Measurements, Cut It As Shown to Make a Funnel Type Shape. Apply Tape on the Cut.

Picture23.png
Picture24.png
Picture25.png

Take a Circular Cardboard Piece of 14 Cm Diameter, and Make a 12 Cm Wide Hole As Shown. Remove the Upper Layer of the Cardboard.

Picture26.png

Cut at Regular Intervals of the Card Paper. Fold Through the Cuts As Shown. Now Stick the Circular Cardboard As Shown on the Paper. Make 2 Such Pieces.

Picture27.png
Picture28.png
Picture29.png
Picture30.png
Picture31.png
Picture33.png

Take a 2.5cm Wide Foldable Cardboard and Roll It Around the Circular Cardboard. Insert the Long Wooden Sticks Through the Paper As Shown.

Picture32.png
Picture34.png

Use Small Cardboard Pieces to Fix the Sticks on the Cardboard As Shown. Cut the Extra Portion of the Sticks and Apply Super Glue to Fix Them.

Picture35.png

Make the Marble Flow As Shown in the Following Images.

Picture36.png
Picture39.png
Picture37.png
Picture38.png
Picture40.png

Label As Desired. the Marble Run Machine Is Ready!

How to make DIY MARBLE Run Machine from cardboard Science Project at HOME