How to Make DIY Air Blower at Home Very Easily

by Harman1796 in Circuits > Reuse

1377 Views, 1 Favorites, 0 Comments

How to Make DIY Air Blower at Home Very Easily

How to make DIY Air Blower at home very easily

In this video, I made an air blower using household items very easily...

Supplies

  1. Blank CD Pack - https://amzn.to/39LZLSS
  2. DC motor - https://amzn.to/3hWrLpJ
  3. Wires - https://amzn.to/3118VHa
  4. Hot Glue Gun - https://amzn.to/2Pc8hRG
  5. Cello Tape - https://amzn.to/2Pa4ZOP
  6. M - Seal - https://amzn.to/2Pbn671
  7. Araldite - https://amzn.to/3ghSUCT
  8. Stick File - https://amzn.to/39V2Ik9
  9. PVC Pipe - https://amzn.to/2DrMmTB

Procedure

ftgj.PNG
dfgf.PNG
ffh.PNG
gthj.PNG
fghg.PNG
dgh.PNG
gghgn.PNG
xdghg.PNG

  1. First of all, cut the center spindle of the CD box.
  2. Now, make a hole in the center of the box and paste the 12v DC motor.
  3. Take a plastic bottle and divide it into sections and cut it as shown in the video...
  4. Now, take a metal sheet and mark the propellor strips and cut it out.
  5. Paste the strips into the cap with the help of hot glue.
  6. Paste this propellor assembly to the motor spindle.
  7. As shown in the video, use a file to make a cone and paste there.
  8. Secure everything with the help of tapes and a hot glue gun.

Air Blower Is Ready...

vbbn.PNG
fhvn.PNG
gfg.PNG

Check Out This Video for Directions...