How to Make Boat With Little Bits Controller by Light Sensor

by emills05 in Circuits > Electronics

801 Views, 3 Favorites, 0 Comments

How to Make Boat With Little Bits Controller by Light Sensor

DSC_0221.JPG

This is a boat controlller by a light sensor , in this case we're using a 9V battery for power , a light sensor for control the fan. This can use for make races in the beach, lake , and even in a bathtub.

Materials for This Project

DSC_0226.JPG

The materials are:

  1. 9V battery
  2. Power module
  3. Cable power
  4. Light sensor module
  5. Fan module
  6. Something dark
  7. Tape two face
  8. Board
  9. Container
  10. Elastic band

Connect the Battery to the Cable

DSC_0227.JPG

We proceed to connect the battery of 9V for power the circuit.

Connect All the Modules

DSC_0228.JPG
DSC_0229.JPG
DSC_0230.JPG

We proceed to connect the module power to turn on the circuit , then we connect the light sensor module that it´s configured in light sensitivity and finally the fan module.

Mount the Circuit to the Mounting Board

DSC_0231.JPG
DSC_0220.JPG
How to make a boat with little bits controller by a light sensor

Once the board is mounted you can put ti on different ways of your choice, be creative!!!