How to Make Auto Water Planting

Hey guys! Today we will going to show you how to make Auto water planting that is cost friendly. This project operate according to the timer we set. When it reach it preset time, the water will flow out and stop when the water detector sense enough humidity. It will water the plant back when it reach the next set timer.

All you need in this project is:

1. DC12V 370 WATER PUMP https://www.mybotic.com.my/webshaper/store/viewPr...

2.MB-18 RAIN AND WATER SENSOR KIT https://www.mybotic.com.my/webshaper/store/viewPr...

3. 13A TIMER https://www.mybotic.com.my/webshaper/store/viewPr...

4. DC JACK (FEMALE) https://www.mybotic.com.my/webshaper/store/viewPr...

5. WATER PUMP PIPE 3*5MM https://www.mybotic.com.my/webshaper/store/viewPr...

6. DC 6V 2A ADAPTER https://www.mybotic.com.my/webshaper/store/viewPr...

All other item we use other than above is just recyclable items. You can use anything suitable item for the project.

Follow the circuit diagram that we show in the image to make sure this auto water planting will work like it should in the introduction.