How to Install RuneAudio on Raspberry Pi

In this Instructable, you are going to learn how install RuneAudio on your Raspberry Pi and how to use it remotely.

If you really enjoy this article, consider checking out my TechWizTime YouTube Channel.

And for an awesome source of Raspberry Pi Accessories, check out my Raspberry Pi Amazon List.

Let’s get started!

1. Etcher
2. RuneAudio
3. Raspberry Pi 1, 2 or 3
4. 8GB MicroSD Card

Go to http://www.runeaudio.com/.

Click on the big blue button that says "Download".

Find your Raspberry Pi version and click on the blue button that says "Download Latest Verision".

You'll be taken to a Sourceforce page, let it load and the download will start.

Once the Image downloaded, open Etcher and click on "Select Image".

After you've selected the image, click on "Select Drive".

Note:Be sure you select the correct drive.

Click on "Flash".

Once you boot into your Raspberry Pi, youll be welcomed by the login screen.

Wait some time and the RuneAudio interface will launch on your Raspberry Pi.

After you've initialized RuneAudio on your Raspberry Pi, go to http://runeaudio.local and you'll have the same RuneAudio interface as you have in Pi.

Congratulations, you’ve just connected your PC to you Raspberry Pi’s RuneAudio installation and that’s it for this tutorial.
If you enjoy this Instructable, consider checking out my TechWizTime YouTube Channel.

And for a good source of Raspberry Pi products, check out my Raspberry Pi Amazon List.