How to Draw the Best Zentangle Art Design for Beginners

Well this a zentangle Design in a circle, this is just with some random imagination with nothing specific in mind while starting the art piece.

I am a hobby artist who loves to make - Doodle, Zentangle, Mandala, Graffiti, Canvas Art

Follow my YouTube channel for more such videos: sarabjeetworld

My Art Instagram: sarabjeet_world

My Personal Instagram: Sarabjeetworld

Well for this project, I used

1- Standard drawing file

2- Micron markers

3- Black sketch pens

4- Graphite pencil.

5- Compass

• Well to start this art piece I made a 360 circle with compass and pencil, Keep it in pencil to start.

• To begin with, inside the circles made 3-4 straight lines on the left downside of the circle, and then cutting the longer lines by smaller horizontal lines, making it a box full of squares.

• the area made in step 2 start covering the boxes alternatively with black color and give it a chess board effect.

• Just right to the chess board effect area, create a line of circles and fill it with smaller black circles in it.
• Just ahead of it create a leaf like structure starting from the chess board area till the center as shown in the image.
• Create a flower like structure on the top of the center with 4 leaves in decreasing order starting with the biggest one then reducing it one by one.

• Next to the leave made in step 4 create a big cone like figure as shown in the picture, fill the corners with black color.
• Then make smaller circles connecting one with the other and inside fill it with 2 lines like you see in a flower.

• In the cone that we did in step 5. Fill it with 4 droplets like figure starting with the biggest one at the bottom and then going upwards while reducing the size, and outline it with thick border lines.
• Fill the droplets with straight lines cutting in 2 portions like we see in any plant leaves as shown in the image.

• In this step, we will fill the 4 leaves that we did in step 4 with different patterns in each of them.
• The smallest one fill it with black color
• The second one fill it with circular patterns connecting with one another.
• The third one black circles with one white focal point in it.
• The biggest one again fill it with the chess board effect in it.
• Give black dot design on the border of all 4 leaves.

• In this created a zig zag patterns of straight lines as shown in the picture, both on the right hand side and left hand side.
• Separate the sections with black dots after a fixed interval.

• Created water drop design in the cone that we made in step 4.
• a flower shaped design on the upper circle area next to the four leaves we made of different sizes.
• a flower shaped design in the center on the tip of the cone we made in step 4.

• In this we covered the cone on the left below circle area, with 6 semi circles creating a alternative black box style as shown in the image.

• In this, we covered the area between the cone structure with full black semi circles on the right side, and semi circles with small black semi circles in it on the left hand side.

Finish it off by covering the left out portion with some random line pattern in it.

And We are done with it.

Hope you guys liked it.