How to Cure Myopia

Hello! this is my first project in instructables. So i'm not very good at english, if anything goes wrong, I'm apologize.

OK! There one day, i saw the article that talk about 6 easy way How to cure myopia, that have method like this.

=====================================================

1. Wear glasses only when you use eyesigh.

me : that easy!

2. Look on, look down, look left and look right each 5 sec do every day.

me : OK!

3. Use your paw close your eye 45 min per day.

me : huh?

4. Blink frequently 10 sec per tim...

me : wait wait wait

OK uh this section is hard cause we must use sense to eye everytime, that much stamina is difficult.

======================================================

So today we will make project from arduino and python that can cure myopia by fix problem of section4. I think myproject wil have mechinelearning that detect myeye. and if i'm not blink in second 10 it will make warning sound to me until i'm blink.

HaHaAHAhAhaha so interesting, let get started!

Supplies :

• arduino (any board)
• computer (or notebook just need 64 bit)
• webcam camera (just cheap webcam)
• speaker (can connect to computer)
• servomicro x1
• servo x1
• breadboard x1
• jumpwire (i'm didn't count)

Equipments :

• glue gun
• screwdriver
• your creative heart

This stap i'm just take off the webcam's frame. cause frame make unwieldy webcam, little heavy and look not cool. But now we've coolest webcam.

We need servo to control webcam for turn to detect myeye like tracking everytime. microservo be x-axis and servo be y-axis. Usually when we look servo from top and turn the label correctly, if servo turn max right will be 0 degree and if servo turn max left will be 180 degree. This is important to connect servo microservo and webcam together corectly with gluegun just like my picture because if not corect it may not work. Oh! and make sure you turn webcam up right way.

This step just attached servo to arduino with jump wire. And don't worries we have a easy diagram for follow attached.

NOTE : normal servo is yellow in pin 4 and microservo is green in pin 5.

I don't know how your speaker look like, but just did like regularly you use speaker or if you don't have speaker you can use built in speaker, nah i'm not serious.

connect arduino speaker and webcam to your computer already to last step.

This step you just take mycode from github, yeah just get it.

whoosp!

github code ---> coming soon...

I know myproject isn't finished but i want you know about progress of thisand this project can't really Cure myopia. Because this is just joking project and have docter prove 6 easy way How to cure myopia isn't real.

Finally, i hope you like this project and funny about it. See you soon.