How to Build an Easy Compost Bin

Composting is a great recycling mechanism for food scraps. With just a few Maker Pipe connectors, conduit, and mesh wire we can build this easy and affordable compost bin.

• (8) 90 degree connectors
• (2) T connectors
• (5) sticks of 10ft long 3/4" EMT conduit
• Mesh wire
• 3x3 piece of wood
• (5) 3/4" EMT one hole straps
• 7/8" Rubber feet (optional)

We need 12 pipes for this compost bin. We like to use this metal pipe and tube cutter.

The pipe lengths we need are:

• (4) 4ft pipes
• (9) 3ft pipes

Measure 12" up and add a 90 degree connector to each 4ft pipe. Then add 90 degree connector to the top of each 4ft pipe facing the same way as the one lower down the pipe.

Add the 3ft pipes into the 90's to create the cube structure. Tighten all the hardware fully.

Use the final 3ft pipe and 2 T connectors to add the support pipe from one side to the other on the bottom square.

If you wanted to add the feet like we did, just slide them over the bottom legs.

Secure the wood to the bottom square with the the one hole straps and your screws of choice.

Secure the mesh to the pipes using zip ties or wire. Now you're ready to get composting!