How to Build a Tensegrity Structure

I wanted to build a tensegrity structure but I cannot find any measurements: here they are...

you need 6 sticks

• diameter: 6mm
• length: 20cm
• and cut a notch at each ends

In France, look for "tourillon" in any hardware soter, it costs only 0,95€ 1m in 6mm diameter

And you need elastic band.

• 1mm diameter
• make 6 loops
• length: the loop is shorter than the stick (minus 1 ou 2 cm).
  The rubber band should be tight on the stick and not fall.

yes, 4 hands are better than 2!

Follow the steps (picture from http://rainydaymagazine.com/wp/2015/05/18/tensegr...)

Or in the pdf (from www.carolboggs.com)

here is your finished tensegrity structure :-)

more inspiration?!