How to Build a Micro Flyer

Hello world! Pure Carbon here with another Instructable. Today I will show you how to make a micro paper airplane which is cheap and simple to build. I learned to build this about five years when I saw a kit for making these planes. I looked at the picture on the box and I thought that these would be pretty simple to make, so after I got home I took a square piece of paper and made my first micro flyer. These planes fly very well and are fun to make when you're bored or you want to fold some paper.

Thank you for all your support, and tips to help me improve my Instructables. Without you guys I wouldn't be doing this right now, you can expect many more Instructables in the future so don't forget to follow me and/or favorite this Instructable. If you have any question or concerns then be sure to comment, or if you just want tell me how awesome this is, that's fine too! Here it is, hope you enjoy it, thank you.

Check me out on:

YouTube: https://www.youtube.com/channel/UCp1Iy_qqZl-TBWrw...

Channel ad:

Facebook: https://www.facebook.com/Pure-Carbon-398550910296...

Twitter: https://twitter.com/Pure_Carbo

Also Support me on Patreon where contributors get early access to all the videos I make along with free PDF downloads of all my upcoming Instructables: https://www.patreon.com/PureCarbon?ty=h

All you need to build is:

• A pair of scissors
• A pencil
• Sticky notes

Start by folding a sticky note in half with the sticky part facing out as shone in the pictures above.

Now you will take you're pencil and sketch out the plane, all you have to do is draw something similar to my design in the picture above. Make sure that the sticky part is on the nose of the plane or else you will have a sticky tail and you will have to use tape to hold the nose together in step 5.

Now cut on the lines to cut out your plane, It doesn't have to be exact here, small mistakes wont affect the flight of the plane too much.

Now take the nose and wrap it around the body to create the weight in the front. Because the nose is sticky it will hold its shape when wrapped, if you didn't use a sticky note the you will need to use a piece of tape.The weight is necessary because it will force the plane to be angled in a direction that will cause air to flow over the wings creating lift and making the plane glide.

Now fold the wings and the tail down to finish the plane.

Like I said earlier if you have any comments, questions, or concerns then leave them in the comment section down below and I will be more than happy to respond. If you like this then please be sure to subscribe to me here and to my YouTube channel for more awesome content like this. there is link on my page to it so be sure to check it out. Thank you for checking out my Instructable and be sure to favorite it, once again thank you.