How to Build a Business Card Cube!

This instructable will walk you through building your very own business card cube!

Note* Sorry for all the blurring.  I didn't want anyone calling my office :)

Take 2 business cards and lay them across one another in a T.

You'll want to ensure that you have an equal amount on either side, though it is not critical to measure.

The side of the business card that you want to show on your cube should be face down on the table at this point.

You will be using the top card as a folding guide.

Press down on the top card and fold the bottom card up.

Make sure that you do not crease the folds as they will become too flimsy and won't hold the cube together.

Make 6 folded cards remembering not to crease the folds.

Your folds should be 90 degrees or less.  If they are too wide, the cube will not hold together nicely.  I find it best to get the folds to 90, then make them a bit smaller.

Now it's time to put it all together.

Note in the picture how the cards fit together.  Always have the little flaps inside the cube.