How to Build Phoenix Power Armor With Legos

Today I will be teaching you how to create a custom build that I like to call: Phoenix Power Armor, out of legos.

How to Build the Frame

Frame:

Parts: (Shown in descending order moving to the right) 2 gold boots 4 armor clips 2 shins 2 knee caps 2 hips 1 micro clip 2 fists 2 fore arms 2 shoulder/upper arms 1 blank torso 2 grey connectors 8 black connectors 2 chest supports

1: Start with blank torso

2: Attach both shoulders/upper arms

3: Attach fore arms to shoulders

4: Attach hips to lower section of torso

5: Attach knee caps to lower section of hips

6: Attach shins to knee caps

7: Attach gold boots to the lower part of shins

8: Connect two connectors to the outside of each shin

9: Attach armor clips to connectors

10: Attach two connectors on the third hole from the top and second hole from the bottom on The front side of the torso

11: Attach armor clip to connectors

12: Flip the frame over and attach two connectors on the first and third hole from the top

13: Attach armor clip to connectors.

14: Take back chest support and attach two of the light grey connectors.

15: Slide back chest support and slide it into the upper holes of the torso.

16: Attach the forward chest support to the light grey connecters in the front of the torso.

17: Attach a micro clip to the bottom of the torso

18: Attach fists to the forearms.

Applying Armor

Armor:

Parts: (Shown in descending order moving to the right) 3 red size four armor pieces 2 red size three armor pieces 2 red size two armor pieces 1 red chest plate 1 helmet 1 gold size four armor piece 2 size two armor pieces 4 size one armor pieces 4 gold armor plates 1 gold plate 2 gold spikes 1 armor core 1 head

1: Connect two red size three armor pieces to the inside of the shins.

2: Connect a gold spike to a red size five armor piece. Repeat this twice.

3: Connect these to the outside of the shins.

4: Connect a red size five armor piece to the back of the frame.

5: Connect a gold armor plate to a gold size two armor piece. Repeat this twice.

6: Connect these to the front of the hips.

7: Connect two red size two armor pieces to the upper armor.

8: Connect a gold size one armor piece to the micro clip at the bottom of the torso.

9: Connect two gold size one armor pieces to the forearms.

10: Connect the red chest plate to the gold size four armor piece.

11: Connect the armor core to the red chest plate.

12: Connect chest plate to torso.

13: Attach gold armor plating to the two shoulder plates.

14: Attach a gold plate to the armor on the back of the torso.

15: Take the green head and attach the helmet to the top of it.

16: Attach head to the top of the torso.

Building the Right Wing

Right Wing:

Parts: (Shown in descending order moving to the right) 3 red connectors 4 black frame pieces 1 black wing frame 2 grey connectors 1 flame piece 1 wing strut 1 red wing blade 1 silver thruster 1 gold spike 1 red size two armor piece 1 gold size two armor piece 1 grey frame piece 1 silver armor plate 1 silver blade 1 gold arm 1 black ball 1 standard arm 1 small arm

1: Take a small arm and connect it to a standard arm with the connecter facing right.

2: Connect a wing plate to the arm.

3: Place a grey piece in the center of the wing plate

4: Connect the wing strut to the grey piece

5: Flip wing over and attach a black frame piece to the grey piece

6: connect a red connecter into the black connecter

7: Attach a grey frame piece to the red connector with the angle facing outwards

8: Attach a red connector to the other end of the grey frame piece

9: Attach a black frame piece to the end of the red connector.

10: Attach a red wing strut to the black frame piece

11: take a silver armor plate and attach a gold arm to the end with the open hole at the end facing upwards

12: Attach a silver blade to the hole at the end pf the gold arm.

13: Take a flame piece and attach a red connector into the hold at the bottom. Attach this to the back of the wing plate

14:Attach a grey connector to the top of the wing plate and then attach a black frame piece to the grey connector

15: Attach a black ball to the top of the grey connector.

16: Attach a silver thruster to the black frame piece.

17: Take a red armor piece and attach a gold spike to the top.

18: Attach this to the black ball at the top of the grey connector.

19: Attach a gold armor piece to the arm of the wing.

20: Attach the silver piece you made earlier to the gold armor piece with the silver blade facing outward.

Building the Left Wing

Left Wing: