How to Build DIY Fold Up Table Saw Stand (Murphy Table Saw)

Hi friend,

Hello friends,
I have a small workshop and I needed to place the saw bench that didn't take up space and was easily usable without having to revolutionize the laboratory every time I had to use it. This is the solution I used table ready just need to connect the power supply and I vacuum hose.

I also made a video of all the achievement sequences.

Ball bearing

Scrap wood

Drill

using a spirit level we go to position the support bracket of the pipe that will act as the hinge of the table.

with the hole saw we pierce the bracket where we will insert the support pipe

We present the ball bearings and let us mark the fastening points.

we assemble the other support bracket and the support pipe always with the help of the level we verify that they are aligned so that the table is in level when finished.

The stand is ready and now we mount the table saw on the stand.

Work finished now the saw table is always ready for use and will no longer occupy the vital space necessary for the arrangement of other material or work space