How to 3d Print Plankton
![Screenshot 2023-03-03 9.35.00 AM.png](/proxy/?url=https://content.instructables.com/FFS/7HBG/LESJPKUR/FFS7HBGLESJPKUR.png&filename=Screenshot 2023-03-03 9.35.00 AM.png)
what I made was plankton from the television show spongebob squarepants on tinker cad. I made this because I got bored one day
Supplies
- 3d printer
- tinkercad
- computer
Creating Body Shape
![Screenshot 2023-03-03 9.41.45 AM.png](/proxy/?url=https://content.instructables.com/FKG/G7ZT/LESJPKYS/FKGG7ZTLESJPKYS.png&filename=Screenshot 2023-03-03 9.41.45 AM.png)
drag a cylinder and stack two semicircles on top and bottom
Arms/legs
![Screenshot 2023-03-03 9.45.59 AM.png](/proxy/?url=https://content.instructables.com/FFV/UA5Z/LESJPL1Z/FFVUA5ZLESJPL1Z.png&filename=Screenshot 2023-03-03 9.45.59 AM.png)
drag cones and strech them long ways and and them to the bottom and sides of the body.
Mouth
![Screenshot 2023-03-06 9.40.00 AM.png](/proxy/?url=https://content.instructables.com/FGA/CWFD/LEWU1ARO/FGACWFDLEWU1ARO.png&filename=Screenshot 2023-03-06 9.40.00 AM.png)
add an oval and turn to a hole. You want to drag it into the body then select the object and group it by doing ctrl+g. add a oval for tongue, and two rectangles for teeth.
Antenna
![Screenshot 2023-03-06 9.45.26 AM.png](/proxy/?url=https://content.instructables.com/F2G/H3U8/LEWU1AUL/F2GH3U8LEWU1AUL.png&filename=Screenshot 2023-03-06 9.45.26 AM.png)
use the draw tool to make two curved u's then add rectangles allong the U to make the pricks
Eye
![Screenshot 2023-03-06 9.49.38 AM.png](/proxy/?url=https://content.instructables.com/FLU/SFAP/LEWU1AZK/FLUSFAPLEWU1AZK.png&filename=Screenshot 2023-03-06 9.49.38 AM.png)
take a place a vertical oval infront of a horizonal oval to make the eye then add a spere for the pupil. Finnaly use the draw tool again to make a U for the eyebrow.