How to Make the Thunderjet Paper Airplane

by OrigamiAirEnforcer in Living > Office Supply Hacks

4995 Views, 1 Favorites, 0 Comments

How to Make the Thunderjet Paper Airplane

Instructables 20 016.jpg
Fast, long range, and agile, the Thunderjet paper airplane is a dart with an inverted gull wing, quite similar in shape to the Research Dart.

TAA USAF Designation: F180-1

Materials

Instructables 20 001.jpg
Required:
1 Piece of 8.5 by 11 inch paper
Tape
Optional:
Scissors
Pencil

Begin Folding

Instructables 19 030.jpg
Instructables 20 002.jpg
Instructables 20 003.jpg
Instructables 20 004.jpg
Take your paper and fold it in half. Then pull the two corners in.

Nose Fold

Instructables 20 005.jpg
Instructables 20 006.jpg
Instructables 20 007.jpg
Instructables 20 008.jpg
Take your paper and fold it so you are pulling a little more that the corner folds down. Then pull the corners in again.

Security Fold

Instructables 20 008.jpg
Instructables 20 009.jpg
Pull the small triangle up over the two flaps to lock them down.

WIng Folding

Instructables 20 010.jpg
Instructables 20 011.jpg
Instructables 20 012.jpg
From it's previous postition, fold the Thunderjet up along its center. Then fold the wings down to the bottom of the fuselage.

Gull Fold

Instructables 20 013.jpg
Instructables 20 014.jpg
Parrallel to the center, fold the inverted gull wing shape. Your folds should appear as shown. After this is done, pull the wings down again.

Taping

Instructables 20 015.jpg
The Thunderjet requires one piece of tape at the rear of the aircraft.

Flight

Instructables 20 016.jpg
Your Thunderjet is now ready for flight. Enjoy!