How to Make the Super OmniDelta Paper Airplane

by OrigamiAirEnforcer in Living > Office Supply Hacks

5103 Views, 3 Favorites, 0 Comments

How to Make the Super OmniDelta Paper Airplane

131_3564.JPG
131_3565.JPG
131_3566.JPG
A fast, long range, flying wing paper airplane, the Super OmniDelta is a fin-less development of heavyfire88's Outsider paper airplane.


TAA USAF Designation: F205-1

Materials

126_3478.JPG
Required:
1 Piece of 8.5 by 11 inch paper
Tape
Pencil
Ruler

Width and Corner Folding

131_3548.JPG
131_3551.JPG
131_3552.JPG
131_3553.JPG
131_3554.JPG
To begin, fold your paper in half along its width. Once it is folded in half along its width, pull the corner folds down.

Nose and Corner Folding

131_3555.JPG
131_3556.JPG
131_3558.JPG
131_3559.JPG
131_3561.JPG
Pull the tip of the nose back so that this tip lies 1 inch in front of the trailing edge. Then pull the corners in once again as shown.

Taping

131_3562.JPG
131_3563.JPG
131_3564.JPG
131_3565.JPG
Tape your Super OmniDelta's airfoil sections down at their rears as directed.

Flight

131_3564.JPG
131_3565.JPG
131_3566.JPG
The Super OmniDelta is a fin-less flying wing which needs precise launches to achieve great flights. To launch your Super OmniDelta, hold it near its center as shown and advance it through the air at a moderate speed and release. This should result in an impressive flight reaching ~50 feet or more!


Enjoy!