How to Make the Stratojagger Paper Airplane
by OrigamiAirEnforcer in Living > Office Supply Hacks
3509 Views, 3 Favorites, 0 Comments
How to Make the Stratojagger Paper Airplane
Fast, long range and simple, the Stratojagger is a great paper airplane.
TAA USAF Designation: F135-1
TAA USAF Designation: F135-1
Materials
Required:
1 Piece of 8.5 by 11 inch Paper
Tape
Optional:
Scissors
Ruler
Pencil
1 Piece of 8.5 by 11 inch Paper
Tape
Optional:
Scissors
Ruler
Pencil
Start Folding
Take the corner and fold it in. Unfold then fold it in again.
Continue Folding
Fold the paper "hot dog"-style
Fold the Corners In
Fold the corners in as shown.
Fold the Corners in Again
Fold them in one more time as pictured.
Fold the Top Down
Fold the nose down along the preexisting fold lines.
Fold the Inner Paper Out
Fold the paper out as pictured and repeat on the other side.
After that your aircraft should appear as it is in the 2nd picture.
After that your aircraft should appear as it is in the 2nd picture.
Fold the Corners in Again
Fold the corners down from
Fold the Lock Up
You now fold the lock along that "preexisting" line mentioned in the last step.
Fold in Half and Fold the Wings
Fold the plane along it's center.
Then fold the wings down to the bottom of the fuselage.
Then fold the wings down to the bottom of the fuselage.
Finished
Now tape where shown.
Now you are ready for flight.
Now you are ready for flight.