How to Make the Destroyer Dart Paper Airplane
by OrigamiAirEnforcer in Living > Office Supply Hacks
3778 Views, 1 Favorites, 0 Comments
How to Make the Destroyer Dart Paper Airplane
So named for its Wild Weasel role, the Destroyer Dart is also a good interceptor.
TAA USAF Designation: F105-1
TAA USAF Designation: F105-1
Materials
Required:
1 piece of 8.5 by 11 inch Paper
Tape
Optional:
Scissors
Pencil
1 piece of 8.5 by 11 inch Paper
Tape
Optional:
Scissors
Pencil
X Fold to Start
Fold the paper from one corner to the other side and repeat on the same side.
Cover Folds
Pull the top down over itself and fold it as shown in the pictures.
Preparation for the Security Fold
Pull the corner into the center as pictured. Repeat on the other side, then fold the plane in half.
Security Fold
Along the airfoil line, fold the two flaps underneath the line.
Fold the Wings
Fold the airplane in half along it's center. Then fold the wing down along the security fold. Repeat on the other side of the aircraft.
Tape Your Aircraft
Tape along the bottom of the security fold, the back of the security fold and the rear of the airplane.
Flight
Your Destroyer Dart is now ready for flight. Enjoy!