How to Make the Bear Paper Airplane
by OrigamiAirEnforcer in Living > Office Supply Hacks
3428 Views, 3 Favorites, 0 Comments
How to Make the Bear Paper Airplane
The Bear is an interesting paper airplane with a tri-tail configuration.
TAA USAF Designation: F84-1
TAA USAF Designation: F84-1
Materials
Required:
1 piece of 8.5 by 11 inch Paper
Tape
Scissors
Optional:
Pencil
1 piece of 8.5 by 11 inch Paper
Tape
Scissors
Optional:
Pencil
Begin Folding
Take your paper and fold it along its length.
Continue
Fold the corners into the center. Then pull the nose back and down.
Security Fold
Fold the corners into the center, though not all the way. Repeat on the other side and then fold the small flap below them up over it.
Fold the Wings
From their previous position fold the airplane in half. Then fold the wings approximately 3/4 in. up from the bottom. Repeat on the other side.
Cut the Vertical Stabilizers
Cut the 3 vertical stabilizers out of the wing and fuselage. Each should be 3/4 in. tall. Allign them pefectly with the back of the wing.
Tape the Airplane
Tape the plane's front and back together in the cited places in the picture.
Flight
The Bear is a slow dart and should be launched like a dart, pitched down.