How to Make Paracord Shark Jawbone With Buckles
2715 Views, 97 Favorites, 0 Comments
How to Make Paracord Shark Jawbone With Buckles
You will need about ten feet of paracord
Take one end of the paracord and put it up through the buckle then take the end and pull it down into a loop and pull the two strands through the loop and pull it tight
Weave
The weave start out with the right side over under loop and keep using that end take the other end over under up through the loop keep repeating
The End
At the end you do the cobra braid the cut and burn