How to Make GhostFace (ScreamMask) Wall Piece

Make your own ghostface wall piece. 
You will need,
- 1/4" plywood
- Jigsaw or scrollsaw
- Drill
- Sandpaper
- carving knife, razor blades or chisels
- wood glue, or white glue

my measurements were 8.5" wide and 17.5" long 

Trace the outside of your stencil onto one sheet of plywood, 
clamping two sheets together cut out two shapes of the mask 
Again using the stencil, cut out the eyes, nose and mouth 
on one sheet. 
sand edges to an angle on the back of the eyes nose and mouth

Clamp together and sand edges round once dry

Cut out eyes and sand down till flush with the back board. 

Glue eyes on and once dry sand smooth inside And Do all your last minute sanding. and touch ups.  get it ready for paint 

Paint entirely white and once whites dry paint black.   and clear coat  and done