How to Make a Touch Screen Stylus!
by CommanderCookie in Circuits > Apple
3646 Views, 27 Favorites, 0 Comments
How to Make a Touch Screen Stylus!
Items Needed
1: a sponge,
2: a pen you can take apart
3: a pipe cleaner
4: a pair of scissors is also needed to cut the sponge.
2: a pen you can take apart
3: a pipe cleaner
4: a pair of scissors is also needed to cut the sponge.
Take Apart Your Pen
Twist off your pen tip/ end and take the guts of the pen out.
Cut the Sponge
Cut the sponge into a strip a very tiny bit bigger then the pen hole.
Wrap the Pipecleaner
Wrap the pipe cleaner around the sponge as shown. Make it tight enough to fit into the pen.
Stick (almost) the Whole Sponge Into the Pen
Stick most of the sponge with the pipe cleaner into the pen as shown.
Wrap the Pipe Cleaner Around the Pen.
Wrap the pipe cleaner around the pen. Trim off any excess sponge to your liking and you are DONE!
NOTES
Please note it will not work if it's completely dry. You also have to be touching the pipe cleaner for it to work!