How to Make a Tetris Wall

This is a project I made for all those lovers for Nintendo Originals..... This Project took me about 4-5 Hours so this project takes a little bit of patience. This project is my first DIY so enjoy!

To Make This Tetris Wall, You Will Need The Following:

-Assorted Colors Of Paper (White, Red, Orange, Yellow, Light Blue, Green, Blue, And Purple)
-Large Piece of Black Paper
-Scissors or X-Acto Knife(X-Acto Knife Works Better For Cut Accuracy)
-Hard Surface
-Glue Stick
-Sharpie (Thick Tip)
-Pencil And Eraser
-Tetrominoes Template (From Tetris Worlds) Found At : http://personalitycafe.com/articles/25029-pieces-tetris.html
  Simply Copy Each Tetris Peice

- Use Your Scissors or  X-Acto Knife To Cut Out The Templates I Have Given You On The Materials Screen
  (Cut Around The Black Edges Of Paper)
- Match The Templates With The Corresponding Color Of Paper

- Carefully Trace Around The Tetrominoes in Pencil
  (Trace The Lines Inside The Tetrominoe also)

- Carefully Trace Over The Pencil Marks In Sharpie
- Erase The Pencil Marks Afterward Gently With An Eraser

- Using Scissors Or An X-Acto Knife Carefully Cut Out The Tetrominoes
- DON'T CUT THE BOXES SEPARATELY!! CUT THE OUTLINE!!
  (Each Tetrominoe Should Have 4 Boxes Inside)

- Glue The Tetrominoes To Some White Printer Paper
- GLUE THEM IN RANDOM ORDER... SO IT LOOKS ORIGINAL!!!

- Glue The Tetrominoes On The White Printer Paper To Black Paper
- You Can Use a Glue Stick Or A Hot Glue Gun
  (I Prefer The Hot Glue Gun, It Works Faster And Sticks Longer)

Enjoy this Tetris Wall by putting this on your finest wall in your house!