How to Make a Tactical Tomahawk

You need to sketch out a design on to a sheet of steel.

You then need to cut out the steel. ( I messed up on mine.)

After you've done that you should have something like this

You should remove the burs and put a good edge on the blade

You now new to harden and temper the steel. ( ill do another instructable on that, I dont want to have a mile long instructable)

You should now clean up your edge and mark and drill holes for the handle. ( I'm doing a paracord handle)( when drilling ALWAYS use clamps!)

You can paint at this point, I chose not to

Now time to wrap, i think you guys don't need too much instruction on it.

Continue this all the way down and when you get to the bottom pull both ends through and tie a square knot and melt the ends together

And your done! If you make this PLEASE DON'T do anything stupid with it. Feel free to comment.