How to Make a Stunt Paper Airplane

by SpeedStrikerXLR in Workshop > Science

22576 Views, 49 Favorites, 0 Comments

How to Make a Stunt Paper Airplane

0131101021-00.jpg
 

Video of It Flying

0131101023-00.jpg
 ok so here it is, you guys asked for one, ill give you one

Downloads

Materials

0130102245-00.jpg
 The only material you will need is paper.

Lets Get Started

0130102245-00.jpg
0130102250-00.jpg
0130102251-00.jpg
0130102252-00.jpg
0130102252-01.jpg
0130102253-00.jpg
0130102253-01.jpg
0130102253-02.jpg
 first, your going to fold the paper like your about to make a square.

then you do the same to the other side.

open the paper out and turn it around.

fold it like so.

then the tricky part. you are going to turn it around then touch the middle of it then it will pop in to this.(2nd last photo)

the make it into this.

Next

0130102254-00.jpg
0130102254-01.jpg
0130102255-00.jpg
0130102255-01.jpg
0130102256-00.jpg
0130102258-00.jpg
0130102259-00.jpg
0131101012-00.jpg
Now, you are going to fold the triangle part horizontal. and then do the same to the other side.

this part is a little hard and I guess .... um complex?

you fold the triangle part into the other part like so.

then, you fold the triangle on the top down.

Next, you fold it in half like any else ordinary paper air plane.

and also do the folds that make the wings.

and thats it for this step.

The Hard Parts

0131101013-00.jpg
0131101013-01.jpg
0131101017-01.jpg
0131101016-00.jpg
0131101015-00.jpg
0131101016-01.jpg
0131101017-00.jpg
0131101018-00.jpg
0131101019-00.jpg
0131101019-01.jpg
0131101019-02.jpg
0131101020-00.jpg
 Yes...They are a little hard and kinda complex.


first, you are going to make this fin thing on the back of the plane.

the hardest part of the plane ( I guess)

you have to make a front scoop by holding the plane by the front of the wings then getting the triangle thing on the bottom of the plane and slide it into a scoop.

Now, you flip the plane on its side and fold like this, then do the same to the other side

also, you make little triangles on both sides like so.

go to the fin thing on the back and make another fin on the inside, or you could just cut it off like like this, but I recommend you do the reverse fin thing.


Almost Done

0131101021-00.jpg
0131101021-01.jpg
0131101021-02.jpg
0131101022-00.jpg
0131101023-00.jpg
0131101023-01.jpg
 now, you are really close to done!


now just flatten the plane out a bit, and them make little ailerons by tearing or cutting with scissors.

the fold like this, put it back like this and...

                                                        YOU ARE DONE!!!!!!!!!!!!!!!
 

Done!

0131101023-02.jpg
                                               Now all you have to do is fly it. 




                                                    Have fun and be safe.