How to Make a Heating Sensor From Fluorescent Lamp Starter
by Mahmoud Alaa in Circuits > Sensors
7985 Views, 13 Favorites, 0 Comments
How to Make a Heating Sensor From Fluorescent Lamp Starter
This instructable is about hacking a Fluorescent Lamp Starter and turn it into a heating sensor , It is a very, I mean very, easy Instructable.
Here is how it works , when you heat the metal chrome part it will shrink and touch the metal wire and close the circuit .
You can download the video and see how it works!
Here is how it works , when you heat the metal chrome part it will shrink and touch the metal wire and close the circuit .
You can download the video and see how it works!
Downloads
What You Will Need
Tools:
Pliers
Materials:
Fluorescent lamp starter
Pliers
Materials:
Fluorescent lamp starter
Start Hacking
First,open the Fluorescent Lamp Starter with the help of pliers and remove the cap like shown in the picture.
Remove the Lamp
Open each metal tube by squeezing the tubes with the help of the pliers like shown , then pull the wires form the metal tubes to get the lamp out with the help of the pliers , after you open it, take the lamp and this plastic thing out like shown , then throw this plastic thing and plastic cap away, we don't need them any more.
Break the Lamp
Break The lamp with the help of the pliers , you can squeeze it with pliers or hit it with the pliers like shown in the picture ,
throw this glass away and be careful not to cut your self with it , and we are Done!
throw this glass away and be careful not to cut your self with it , and we are Done!