How to Make a Cap2Go
I saw these caps to go, their crazy expensive for what you get, so I made one my self!
What You'll Need
Tools
Prongs
Hammer
Materials
1 cap
Glue, any of your choice
Some steel wire
Prongs
Hammer
Materials
1 cap
Glue, any of your choice
Some steel wire
Pierce the Cap
Most caps haves bump in the middle on the top of the cap, align the nail In that bump and start hammering. When a 1/8 of a inch through start twisting the nail to make the hole slightly bigger.
Place Some Hooped Wire and Glue.
Take some wire and snip it off with the prongs, then hoop it and push it through the hole. First add a lot of glue on one side and let it dry. When dry glue the other side and let it dry.
Now your pretty much finished! Take a carbine hook ad place it through the loop.
Instead of paying 8$ you can make one in no time for only pennies! The level of knowledge of this project is 0/10!
[this is my second instructable sorry if it's worthless but please no hate] if any questions comment!! Thanks!
Now your pretty much finished! Take a carbine hook ad place it through the loop.
Instead of paying 8$ you can make one in no time for only pennies! The level of knowledge of this project is 0/10!
[this is my second instructable sorry if it's worthless but please no hate] if any questions comment!! Thanks!