HoverCraft Fablab61

This HoverCraft was made by Rostov Summer's School's team special for Fablab :) Our masterpiece was our first experience in this sphere. Create & enjoy!

Take foam =20mm. Cut a foundation from foam 200mm x 300mm. Cut the circle from foam d=140mm & stick to the foundation.

Cut a skirt l=1m, w=40mm. Stick this skirt to the foundation.

Take first three-bladed propeller d=130mm. Fix it into a circle.

Use this plan and cut a back protector from foam for your second propeller. Stick to your foundation

Take these plans and cut it (use plywood). Collect it. Then Fix second propeller to the construction

Check yourself. You need:

1) Arduino Pro Mini (on ATmega168, 5V, 16M) - 2 pcs

2) Wire-modules XY-MK-5V & XY-FST (FS1000a)

3) Joystick module Keyes_SJoy.

Connect the modules (use scheme for this step, look at the files :) )
Fill sketches for arduinos in any convenient way.

Check what you have:

• Motor MT 1806 (x2)
• Regulator DUALSKY XC 1210 BA (x2)
• Battery (LiPol 11V 1Ah)
• Servo SG 900

The motor connect to the regulator. The regulator connect to the battery and the radio receiving equipment.

Connect your foundation with motor & radio receiving equipment. Check this out!

If you want you may create your own special design & logo for HoverCraft :)