House (Scene)

by AwesomeBanana120 in Workshop > 3D Printing

393 Views, 5 Favorites, 0 Comments

House (Scene)

House (Scene).png

This is the house that I have created. It has a few accessories in it. Please vote for it because it took me over 2 hours to make it! I spent a lot of time and effort putting this house together. If you like this house and you built it put a picture of it down below. I would love to see photos of them.

Add Your Feet

step one.png

The first step you want to do is add your feet. Take 4 duck legs and put them in 4 different corners.

Add You Body

second step.png

The second step you should do is add the body. (Or unless you would like stuff to be floating in the air :) !)

Add You 2 Levels

3 step.png

The 3rd step to make this house is to add your 2 levels. Take 2 brick, flatten them out and put them on.

Add Your Balcony and Welcome Sign

4 step.png

Your 4th step is to add your balcony and "welcome" sign. First drag a text and change it to "welcome" and then put it on very slim. Then take a brick and stretch it out and put it on.

Add You Accessories

5 step.png

The 5th step is to put in your house accessories. Take a circular table and put it in the corner. Then add a small chair. Then put in your lamp (unless you don't want light in you house LOL)! Then add your portal to the first floor which is the metal can which you have to make very very small. Then add your 3 airplanes. make sure to tilt the side 2 to make it look like they are turing.

Add Your Roof

last step.png

Your last step to finish this house is to add the roof. Make sure to stretch it out alot. Once you have done those steps you have successfully finished you house. YAY!