House From Up

The house from Up in the sky that I made for this contest.

Tinkercad

I added cream colored a box 37 by 40 box with a height of 20 and then attached to the corner I added a 31 by 26 green polygon with a height of 20.

On top of the polygon I added a 21 width and 38 length yellow box with 16 height.

Add a 26 width and 46 length 16 height roof on top of the first box and add a 6 by 6, 13 height box inside of the roof. Place a 6 width 7 length 15 height roof on top of the small box.

Add a 21 width 38 length 10 height roof on top of the yellow box

Create 2 black boxes with 15 width and 40 length on both sides of the roof.

Add a thin box that covers the entire bottom of the house to serve as a floor.

Add windows and a door around the whole house

All measurements of the window are 3 width 13 length and 1 height.

Door is 7 width 0.01 length and 14 height

Add a 5 width 5 length 14 height polygon in between the roofs and make it black.

Add small roofs going into the yellow box on both sides.

Add small rectangles connected to each other on the porch of the house to make a fence.

Make spheres into an oval shape and bunch them together with different colors

Copy it a couple times, place them over each other, group them, and place it over the chimney with a thin grey box to serve as a string.

Group everything together.

Move it all up.

Make the background blue and make white spheres overlapping each other to make clouds.