Hot Glue Sculpture

Here I will show you how to use only hot glue and an LED.

You will need...
- Hot Glue
- Foam
- Printer
- 123D

Find a model on 123D and change the slice thickness to the thickness of your foam sheet.

Print it out and transfer the shapes to the foam, now cut the foam.

Fill the Molds with the Hot Glue up to the top.

Then stack and glue the slices.

Heat a Knife and sculpt to your liking.

Now push the tip of the hot glue gun into the bottom and stick the bulb into the hole.
 
Done!