Hot Wire Cutter for Ribbons and Webbings (synthetics Belts)

+++++++ ELECTRICAL RISK AND DEATH HAZARD. This manual is designed for people who know at least fundamentals of electricity and know the risks / cares of working with electrical elements. If you do not know about electricity I recommend that you buy the machine made or that you order to manufacture the machine ++++++

Temperature in 10 seconds: 200 °C

Temperature in 30 Seconds: 400 °C

Maximum temperature: 440 °C (after 40 sec)

This machine seal the fibers while make the cut in the fabric, ribbons, webbings, belts and other. tested in Polyester and nylon.

Materials:

• 1 m Ferric-nickel Wire 0.8
• 2 m Cable No. 10 Yellow
• 2 m Cable No. 10 White
• 1 10A fuse
• 1 Transformer 120VAC to 35VAC (I used one of a damaged microwave oven) 1000W
• Insulating tape
• Electric terminals
• Wood and screws for the frame
• Bolts, washers and nuts 3/8"

2 circuits:

Right: 120VAC, button NA.

Left: Ferric-Nickel wire 0.8
Middle: Transformer microwave oven 120VAC to 35VAC

If you are a english speaker, no problem pal !!, write your questions and I answer back :)