Honeycomb Plug (lobe Jewelry)

by Dylan Larsen in Workshop > 3D Printing

675 Views, 3 Favorites, 0 Comments

Honeycomb Plug (lobe Jewelry)

20160609_211246.jpg

Figured it was a good time to stretch one of my lobes. So I built a new plug on my 3D printer for my left lobe.

Machine on the Job

3D PRINTING
20160609_210942
20160609_211031.jpg
20160609_211027.jpg

On CAD I designed the wearable to be 9/16" wide and the diameter to be 1" 7/8" diameter. Set it all over to the 3D printer. 1 hour and 23 minutes later it was done.

Enter the Lobe

20160609_211406.jpg
20160609_211246.jpg
20160611_105352[1].jpg

Got it off the heated build platform and let it cool down some. A good 10 minutes later it was a perfect fit. Thank you for taking your time to check my project out. It means a great deal to me.