Homemade Electronic Components Organizer

.....Hey Fellas, This is my first instructable on air and fell free to leave any comments below if you have any doubt or improvements on this..........

This instructable will guide you through the process of making your own electronics components organizer box..........

You will need only a rectangular plastic box of your own requirement size and some plastic srtips........

Getting Started With the Box

1) Cut plastic strips of your box's length and height.

2) Cut several of them to make your box's rows and columns...

3) I have made a 3*4 + 2 columns...Box. You can have as many as u want as per your requirements..

4) Cut slips on your rows and columns stiprs to make a compartment..

5) Paste the staring of the rows to your box...... Then overlap the columns over your rows....So that it make the compartments to store your components..

6) Now categorize your components into -

a. INPUTS

b. SEMICONDUCTORS

c. OUTPUTS

d. CONNECTER AND USED COMPONENTS

e. RESISTORS

f. JUMPER WIRES.

NOTE:: THIS CAN BE ANY WAY AROUND AND IT'S TOTALLY AS PER YOUR WISH TO ARRANGE YOUR COMPONENTS,BUT FOR BETTER GRABBING AND ASSORTING YOU CAN FOLLOW THE ABOVE CATEGORIZATION.................................................................................................