Homemade Stickers, My Way

Ey' peeps!

i'm back!

today i'm going to show you how i make homemade, glossy, somewhat water resistant paper stickers.

Get Your Stuffs Together

Alright, so here's what you'll need:

a $6 printer

more expensive ones will probably work aswell, probably. ;)

a sheet of printer paper

double-sided tape

clear packing tape

scissors

so, now's the time to design your sticker. i'd recommend GIMP if you want a good free (and open source) image editor and drawing program.

time to print your design!

first, you need to place a motherboard and some random stuff on your printer...

JK

you know you need to tidy up your room when you start using the printer that's already standing on a chair, as a shelf...

well, back to the point. i used OpenOffice to prepare the picture, and then just printed it.

if you own a printer, you'll most likely know how to do that.

done with printing? k, good.

this will be a bit of a 4-in-1 step, so grab yer stuff!

first, cut out the picture

then cover the backside in double-sided tape

then cover the front with packing tape

cut off the exess tape...

so, that's it!

remove the cover of the double-sided tape and stick it somewhere!