Homemade Soda Pop Cooler
I wanted to have a way to cool my Soda Pop quickly, so I made this!
Supplies
Cardboard Box (Approximately 9.5 x 9.5 x 7)
Bubble Wrap/Insulation
Utility Knife
2 Plastic Cups( I used the Hefty one, but any will work)
Digital Calipers
Hot Glue Gun
Hot Glue Gun Sticks
Gallon Ziplock Bags
Cutting the Hole
Cut a circle hole in the box. Use your calipers to measure 92.5mm. You can use a circle template. I used a cup and traced around it. After that you need to cut the hole. I used a utility knife.
Repeat this process 1 more time.
Adding Insulation/Waterproofing
Line bubble wrap on the on all inside surfaces in the box. Leave clearances for the cups. Tape the edges to the box.
Hot Gluing
Hot glue the two plastic cups (Holes facing toward you) in.
Before gluing, tape the cups in place for better alignment.
Tape the cutout cardboard circles for caps.
Setting Up the Chiller
Fill the ziplock bags with ice and insert into the box. Be careful not to break you cups off.
After use take out the ice bags. This will prevent condensation buildup.