Homemade Laptop Table for Bed

This is a laptop table for the bed, I like to watch movies before falling asleep, but keeping a laptop on your knees is uncomfortable. That's why I built this laptop table. In addition, I use this table to put down the phone for a night battery charge. I also equiped this table with a night lamp that can be easily switched on and off with your foot. The shelf from the table is mounted on hinges, so I can easily change the angle of inclination.

This article can also see here:

Homemade laptop table for bed

Components and Tools

Measuring and Cutting

All elements I measured and trimmed accordingly, as shown above.

Welding Bracket

This bracket I welded with two square pipes and two flat bars.

Putting Everything Together

At first I mounted my bracket to two wooden beams.

Then I connected OSB boards with wooden beams using metal angles.

In the next step I made a wooden frame, to which I installed a comb limiter. Using the hinges, I connected two wooden beams with a shelf.

It is easy to change the angle of the slope of the shelf.

I mounted this wooden beam to protect against slipping.

Protection against slipping from the shelf.

I glued the power strip with two-sided adhesive tape. In addition to the shelf I attached a cork from wine. This allowed me to put my phone under the power supply.

I also mounted a night lamp that can be easily switched on and off with your leg.

Switched on and off night lamp.

The End

Finally I put my new laptop shelf between the bed and the wall.

This article can also see here:

Homemade laptop table for bed