Homemade 360 ံ LAMP
![IMG_20160822_170148.jpg](/proxy/?url=https://content.instructables.com/F9S/VX0O/IRXTGY1X/F9SVX0OIRXTGY1X.jpg&filename=IMG_20160822_170148.jpg)
welcome to this Instructable!
UPDATE: 22/08/2016 Sucesd tests.
Recently, I used all old Materials (Recycled pipe).
I use this parts and tools.
(1) Pieces of wood. (2) Recycled pipe (3) Driver screw. (4) Screws (5) Bult (6) wires
Ready
![IMG_20160822_154844.jpg](/proxy/?url=https://content.instructables.com/F0C/LLNU/IRXTGSER/F0CLLNUIRXTGSER.jpg&filename=IMG_20160822_154844.jpg)
These two wood are used as a foundation.And then, T shape pipe is drilled by screw driver.we made the hole to connect with the long pipe and wood.
Try to 360 ံ Lamp
![IMG_20160822_155805.jpg](/proxy/?url=https://content.instructables.com/FHZ/532N/IRXTGVRO/FHZ532NIRXTGVRO.jpg&filename=IMG_20160822_155805.jpg)
![IMG_20160822_155808.jpg](/proxy/?url=https://content.instructables.com/FCA/3JAW/IRXTGVYQ/FCA3JAWIRXTGVYQ.jpg&filename=IMG_20160822_155808.jpg)
The wire is put in the pipe.
![IMG_20160822_160013.jpg](/proxy/?url=https://content.instructables.com/F5L/GUAP/IRXTGW9B/F5LGUAPIRXTGW9B.jpg&filename=IMG_20160822_160013.jpg)
The small long pipe is put in the hole.
![IMG_20160822_160045.jpg](/proxy/?url=https://content.instructables.com/FAA/5WSH/IRXTGWFE/FAA5WSHIRXTGWFE.jpg&filename=IMG_20160822_160045.jpg)
And then, the big long pipe is fixed on the small long pipe.
![57bae2fb4936d4f94700038e.jpeg](/proxy/?url=https://content.instructables.com/FI6/ZNUR/IRXTGXL8/FI6ZNURIRXTGXL8.jpg&filename=57bae2fb4936d4f94700038e.jpeg)
![IMG_20160822_160157.jpg](/proxy/?url=https://content.instructables.com/FVB/PWGZ/IRXTGXPT/FVBPWGZIRXTGXPT.jpg&filename=IMG_20160822_160157.jpg)
![IMG_20160822_163751.jpg](/proxy/?url=https://content.instructables.com/F3D/0INM/IRXTGXRP/F3D0INMIRXTGXRP.jpg&filename=IMG_20160822_163751.jpg)
![IMG_20160822_165132.jpg](/proxy/?url=https://content.instructables.com/FT4/3LRA/IRXTGXSX/FT43LRAIRXTGXSX.jpg&filename=IMG_20160822_165132.jpg)
![IMG_20160822_170148.jpg](/proxy/?url=https://content.instructables.com/FJA/F6IV/IRXTGY9P/FJAF6IVIRXTGY9P.jpg&filename=IMG_20160822_170148.jpg)
![IMG_20160822_170545.jpg](/proxy/?url=https://content.instructables.com/FWB/HX6X/IRXTGYB0/FWBHX6XIRXTGYB0.jpg&filename=IMG_20160822_170545.jpg)
The T Shape Pipe is put on to the big long pipe in the converted position.the bult is fix at of T shape converted pipe.