Home Made PCB

by recwap in Circuits > Soldering

62902 Views, 78 Favorites, 0 Comments

Home Made PCB

02-homemade-pcb-with-components.jpg
01-homemade-pcb-sch2.jpg
01-homemade-pcb-sch1.jpg
Read more about this Home made PCB guide on my web site: DIY PCB. First step prepare the SCH and PCB files.

Step 2 of Home Made Pcb

03-homemade-pcb-copper-circuit-board-cut-to-dimension.jpg
03-homemade-pcb-print-on-white-paper-1.jpg
03-homemade-pcb-print-on-white-paper-2.jpg
Prepare the copper PCB and the print the PCB layout

Step 3 of Home Made Pcb

04-homemade-pcb-print-on-glossy-paper-from-magazines-2.jpg
04-homemade-pcb-print-on-glossy-paper-from-magazines-1.jpg
Print the PCB layout on a glossy paper

Step 4

05-homemade-pcb-cleaning-the-couper-surface.jpg
06-homemade-pcb-cut-the-printed-glossy-paper-1.jpg
Clean the copper surface.

Step 5

07-homemade-pcb-cover-coupper-surface-with-the-printed-glossy-paper-2.jpg
07-homemade-pcb-cover-coupper-surface-with-the-printed-glossy-paper-1.jpg
Cover the copper surface with the printed glossy paper

Step 6

07-homemade-pcb-cover-coupper-surface-with-the-printed-glossy-paper-3.jpg
08-homemade-pcb-use-heated-iron--transfer-the-tonner-to-copper-1.jpg
08-homemade-pcb-use-heated-iron--transfer-the-tonner-to-copper-2.jpg
Using an fully heated iron transfer the tonner to the copper surface. More interesting DIY projects on my web site.

Step 7

09-homemade-pcb-immerse-in-water-clean-rezidual-paper-1.jpg
09-homemade-pcb-immerse-in-water-clean-rezidual-paper-2.jpg
09-homemade-pcb-immerse-in-water-clean-rezidual-paper-3.jpg
Immerse in hot water the PCB and clean the residual paper from the surface.

Step 8

10-homemade-pcb-immerse-in-ferric-chloride-corrosion-copper-1.jpg
10-homemade-pcb-immerse-in-ferric-chloride-corrosion-copper-2.jpg
10-homemade-pcb-immerse-in-ferric-chloride-corrosion-copper-3.jpg
11-homemade-pcb-clean-remained-toner.jpg
Immerse the PCB in ferric chloride. More images with this DIY PCB project on my webpage.

Step 9

12-homemade-pcb-prepare-the-components.jpg
13-homemade-pcb-dot-the-drill-hole.jpg
14-homemade-pcb-drill-the-components-holes-1.jpg
14-homemade-pcb-drill-the-components-holes-2.jpg
Prepare the components and drill holes in the PCB for them.

Step 10

15-homemade-pcb-clean-the-copper-surface-electroless-copper-deposition.jpg
16-homemade-pcb-prepare-copper-surface-for-soldering.jpg
Prepare the copper surface of the PCB for soldering.

Step 11

17-homemade-pcb-soldering.jpg
18-homemade-pcb-cut-the-excess-lead.jpg
19-homemade-pcb-final-results-Final inspection-1.jpg
Solder the components in to the PCB, cut the excess leads and make a final inspection before you power up the system!